MAC8 INSERTS

INSERTS

Non-Threaded Inserts [THB Series]	PAT.P

PCB is mounted
above chassis

Non-threaded type inserts for PCB through-hole.
PCB is mounted above the chassis by inserting screws
from the compnent side of PCB to tapped holes on the chassis.
Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow.
Bulk type (100pcs/pack) is available.
THB-1.5-2-M3-B←put"B" for bulk.
Bulk type does not have adsorption cap.
Material: Brass
Finish: Sn plating over Ni
Recommended PCB Thickness: 1.6mm
(other PCB thickness applicable)

Dimensions

THB-□-2 (AΦ=4.5 BΦ=3.0 CΦ=2.1 D=0.3 in dimension)

P/N	L	H	Qty / Reel		P/N	L	H	Qty / Reel
THB-1.5-2	1.5	0	400		THB-4.6-2	4.6	3.0	200
THB-2.1-2	2.1	0.5	400		THB-5.1-2	5.1	3.5	200
THB-2.6-2	2.6	1.0	400		THB-5.6-2	5.6	4.0	200
THB-3.1-2	3.1	1.5	400		THB-6.1-2	6.1	4.5	200
THB-3.6-2	3.6	2.0	400		THB-6.6-2	6.6	5.0	200
THB-4.1-2	4.1	2.5	400

THB-□-2.6 (AΦ=5.0 BΦ=3.6 CΦ=2.7 D=0.3 in dimension)

P/N	L	H	Qty / Reel		P/N	L	H	Qty / Reel
THB-1.5-2.6	1.5	0	400		THB-4.6-2.6	4.6	3.0	200
THB-2.1-2.6	2.1	0.5	400		THB-5.1-2.6	5.1	3.5	200
THB-2.6-2.6	2.6	1.0	400		THB-5.6-2.6	5.6	4.0	200
THB-3.1-2.6	3.1	1.5	400		THB-6.1-2.6	6.1	4.5	200
THB-3.6-2.6	3.6	2.0	400		THB-6.6-2.6	6.6	5.0	200
THB-4.1-2.6	4.1	2.5	400

THB-□-3 (AΦ=5.5 BΦ=4.1 CΦ=3.1 D=0.3 in dimension)

P/N	L	H	Qty / Reel		P/N	L	H	Qty / Reel
THB-1.5-3	1.5	0	400		THB-4.6-3	4.6	3.0	200
THB-2.1-3	2.1	0.5	400		THB-5.1-3	5.1	3.5	200
THB-2.6-3	2.6	1.0	400		THB-5.6-3	5.6	4.0	200
THB-3.1-3	3.1	1.5	400		THB-6.1-3	6.1	4.5	200
THB-3.6-3	3.6	2.0	400		THB-6.6-3	6.6	5.0	200
THB-4.1-3	4.1	2.5	400

THB-・-4(A=7.0 B=5.5 C=4.3 D=0.5 in dimension)

P/N	L	H	Qty/Reel		P/N	L	H	Qty/Reel
THB-1.5-4	1.5	0	350		THB-4.6-4	4.6	3.0	450
THB-2.1-4	2.1	0.5	350		THB-5.1-4	5.1	3.5	450
THB-2.6-4	2.6	1.0	250		THB-5.6-4	5.6	4.0	300
THB-3.1-4	3.1	1.5	250		THB-6.1-4	6.1	4.5	300
THB-3.6-4	3.6	2.0	200		THB-6.6-4	6.6	5.0	250
THB-4.1-4	4.1	2.5	200

Recommended
Pat Layout

Metal Mask Thickness
Recommended: 150 to 200μ

P/N	AΦ+0.1, -0	BΦ
THB-□-2	3.2	5.5
THB-□-2.6	3.8	6.0
THB-□-3	4.2	6.5
THB・-4	5.7	8.0

Tape & Reel Dimension

THB-1.5 to 4.1 : C=4.3
THB-4.6 to 6.6 : C=6.8
THB-□-2 :A=4.8 B=3.3
THB-□-2.6 : A=5.3 B=3.9
THB-□-3 : A=5.8 B=4.3

THB-□－４

P/N	a	W	H	F	G	P
THB-1.5-4	178	17.5	3.0	16	7.5	12
THB-21.-4	178	17.5	3.0	16	7.5	12
THB-2.6-4	178	17.5	4.0	16	7.5	12
THB-3.1-4	178	17.5	4.0	16	7.5	12
THB-3.6-4	178	17.5	5.0	16	7.5	12
THB-4.1-4	178	17.5	5.0	16	7.5	12
THB-4.6-4	254	17.5	6.0	16	7.5	12
THB-5.1-4	254	17.5	6.0	16	7.5	12
THB-5.6-4	254	25.5	7.0	24	11.5	16
THB-6.1-4	254	25.5	7.0	24	11.5	16
THB-6.6-4	254	25.5	8.0	24	11.5	16